Receiver power supply PRX-5A, stabilized

  • Ready for shipment in 2 days
  • Item no.: 4136
  • Shipping time: 3 - 5 workdays
  • Our price: 53,90 €
  • including 20% VAT., plus shipping (standard / over night)
Loading ...

Manufacturer:
Category:

Description

A highly developed, stabilised receiver power supply with intelligent power management. This unit guarantees a stabilised, user-selectable power supply for the receiver, with the aim of further enhancing the reliability of the power supply. It is suitable for use with a wide range of receiver batteries, and therefore forms a simple means of providing a reliable power supply in a very wide range of models. If the battery voltage should collapse while the system is operating - even if only for a brief period - the unit stores the event and indicates it subsequently. The user is therefore warned of an inadequate or even failing receiver battery, and can implement suitable counter-measures in good time. If the PRX is switched on via the safety on/off switch, it remains switched on until it is explicitly switched off even if the switch is defective.
For use with one or two receiver batteries
Simultaneous discharging when used with two batteries
For use with five-cell or six-cell NiMH batteries or two-cell LiPo or LiFe batteries, GRAUPNER/JR G3.5, G2 and BEC connectorsFour user-selectable output voltage levels for powering the receiver (5.1 V / 5.5 V / 5.9 V / 6.3 V)
Dual receiver power supply for maximisedsecurity
Two LEDs indicate the operational state of Battery 1 and Battery 2 separately
Ultra-bright LEDs for good legibility even in poor light conditions
Integral high-quality safety On / Off switch
Heavy-duty construction for handling high currents
Low-profile switch and LEDs to avoid spoiling the model's appearance and characteristics
In-line arrangement of mounting lugs, LEDs and switch for simple installation using the drilling template supplied

Battery types:
2-cell Lipo
2-cell LiFe
2-cell LiIon
5-cell NiMH/NiCd
6-cell NiMH/NiCd

Input voltage: 4V to 9V (stable operation is not possible below 4V)
Max. input voltage: 12VBiascurrent: approx. 0.3µA (switched off)
Max. continuous current: approx. 5 A (for 1 min. for LiPo 5.9V)
Max. peak current: approx. 15A (for 1 sec. for LiPo 5.9V)
Max. peak current: approx. 25A (for 100 msec. for LiPo 5.9V)

The data refer to operation of the PRX without active cooling e.g. by overflowing air. With cooling, the values are even higher

Specification
All-up weight, approx.: 35 g
Dimensions (LxWxH): 70 x 20 x 20 mm

Question on item

Question on item
Contact information