MT Programmable Brushless ESC 70A - no BEC

  • low stock - delivery time 2-3 days
  • Item no.: MTH70A
Loading ...

Description

Features: Easy setting,easy operation.Specially designed for Helicopter. It can be connected to USB port of PC by USB cable; it is convenient to set all parameters of ESC. Safe start-up system:The motor won't be started no matter which position the throttle stick is on when the battery is connected. Automatic power cut-off:When the motor stops rotating or the radio signal loses for more than 3 seconds, the power will automatically be cut off. High rate switching Pulse Width Modulation (PWM): 8KHz. Three throttle curve in selection:Logarithmical/Linear/ Exponential. Throttle acceleration selection:Slow/Medium/Hard. Over-heat protection:The power will be cut-off as it is heated up to 110Ô?. Over-voltage protection:The motor won't be started if the voltage is higher than 18V. Low-voltage cut-off:By PC (Via USB link), the LiIo/LiPo battery single cell's cut-off voltage can be set during 2.0V-3.2V (Step: 0.1V).By PC (Via USB link), the Ni-MH/Ni-CD battery single cell's cut-off voltage can be set during 0.4V-1.0V (Step: 0.1V). Timing mode:Timing mode 1: 0-7┬░.Timing mode 2: 8-18┬░.Timing mode 3: 19-24┬░.Timing mode 4: 25-30┬░.By PC via USB cable: timing mode can be set from 1-30 (Step: 1 ). Factory Default Setting: Soft Start mode. Timing mode 1 (0-7┬░).For outrunning motors and motors with more than 6 poles. Cut-off voltage mode 1. (Intellectual cut-off for Ni-MH/Ni-CD battery). "

Question on item

Question on item
Contact information